收藏本站

SPECIFICATION CONTROL DRAWING
Page 2 of 2
Revision
H
SCD Number
55A8039
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms), at sea level
ACCELERATED AGING (CROSSLINKING PROOF): 300 ± 3°C for 7 hours
BLOCKING: 200 ± 3°C for 24 hours
BRAID COLOR: Dark green preferred; munsell color limits 5Y 3/2 and 5B 2/0.5
CONCENTRICITY: 70% (minimum)
FLAMMABILITY: Procedure 1, 3 seconds (maximum); 3 inches (maximum); no flaming of facial tissue
HUMIDITY RESISTANCE: Insulation Resistance, 3000 megohms for 1000 ft. (minimum)
IMMERSION: Diameter increase 5% (maximum); no cracking, no dielectric breakdown
INSULATION ELONGATION AND TENSILE STRENGTH:
Tensile strength, 5000 lbf/in2 (minimum) for primary insulation
5000 lbf/in2 (minimum) for total insulation (primary insulation and jacket)
Elongation, 75% (minimum) for total insulation (primary insulation and jacket)
INSULATION FLAWS:
Primary Insulation,
Spark Test, 1.5 kV (rms) at 60 Hz
4.2 kV (rms) at 3 kHz
Impulse DielectricTest, 6.0 kV (peak)
Finished Wire,
Spark Test, 5.7 kV (rms) at 3 kHz
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION RESISTANCE: 3000 megohms for 1000 ft. (minimum)
INSULATION THICKNESS: 0.003 in. (minimum) for primary insulation,
0.004 in. (minimum) for outer jacket
0.009 in. (minimum) for total insulation
LIFE CYCLE: 200 ± 3°C for 500 hours
LOW TEMPERATURE-COLD BEND: -65 ± 3°C for 4 hours
SHRINKAGE: 200 ± 3°C, for 6 hours, 0.125 in. (maximum) in 12 inches
SMOKE TEST: 200 ± 5°C, no visible smoke
SURFACE RESISTANCE: 500 megohms-in. (minimum), both readings
THERMAL SHOCK RESISTANCE: 150 ± 3°C, 0.125 in. (maximum)
VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms), 60 Hz
WICKING: 2.25 in. (maximum)
WRAP TEST: 200 ± 3°C for 2 hours
PART NUMBER:
The “*” in the part numbers on page 1 shall be replaced by a color code designator.
5D shall be used to designate dark green.
1 / Example: AWG 8, dark green; 55A8039-8-5D
AWG 8, white; 55A8039-8-9
1 / See footer section on page 1
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
72-CHH-1 RIBBON CABLE ASSY 12" SKT-SKT
72-MDC-32ADC MICRODAC CONTROLLER ANALOG/DIGTL
72-PMO-1 CONTROL BOARD SERIAL PROMUX
721038-000 SHIELD TERMINATOR
727707-000 CABLE 1 COND 16AWG SHIELDED
72926-C-40 CABLE INS BNC M-BNC M 50 OHM 40"
73063-BB-36 CABLE MMCX PLUG-PLUG RG316 36"
73064-BB-36 CBLE MMCX PLUG-R/A MMCX PLUG 36"
相关代理商/技术参数
7-1633703-0 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-1 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-2 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-3 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-4 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-5 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-6 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1
7-1633703-7 功能描述:ANVIL, COMBINATION 制造商:te connectivity amp connectors 系列:* 零件状态:有效 标准包装:1